| |
Capillary Burner
 The removal of the polyimide in order to provide a UV transparent window is often a source of inaccuracy in CE experiments.
For convenient and reproducible preparation of UV transparent windows in polyimide covered capillaries, Capital Analytical have developed an easy to use capillary burner device. The capillary is simply pushed trough the guide holes until it reaches the correct position for the window as closed by the user and the simple push of a button initiates a controlled heating of the capillary making a small, precise and highly reproducible window.
Precise and reproducable
Easy to use
Produces clean finish
Saves time and money Long life filament
Cat. No. EKP112 =£450.00
Description |
Cat No. |
Price (£) |
|
CE Capillary Burner |
EKP112 |
|
Burner Filaments
The Capillary Burner is delivered fitted with a standard burner filament which produces a detection window with an approximate length of 2mm.
This standard filament can be removed and replaced with a filament producing a longer or shorter window in accordance with the analyst’s requirements.
Burner filaments are available in three different coil lengths: 1mm, 2mm and 3mm.
Description |
Coil Length/mm |
Part No. |
Price £ |
|
Burner Filament |
1mm |
EKR112A |
|
Burner Filament |
2 mm |
EKR112B |
|
Burner Filament |
3 mm |
EKR112C |
|
The diagram below shows an example of four different windows created using the standard 2mm burner coil on a 50mm i.d. 375mm o.d. capillary. The high degree of reproducibility of windows produced using the EKT burner is clearly evident
Capillary Cleaving Tool
 In the preparation of capillaries, clean perpendicular edges are essential if high efficiency and good peak shares are to be obtained. Examples of satisfactory and unsatisfactory capillary end cuts are shown in the adjacent diagram.
With conventional cutting tools the result is often hit or miss. However, using this sapphire tipped tool high quail edges can be obtained easily and reproducibily. If handled with care, this tool will provide many years of service.
Description |
Cat No. |
Price (£) |
|
Capillary Cleaving Tool |
EKP201 |
|
 Capillary Inspection Lens
The lens, providing an 8 x magnification, can be used to inspect capillary edges and detection windows. It can also be used to check the alignment of the detection window when fitting capillaries into cartridges.
Description |
Cat No. |
Price (£) |
|
Capillary Inspection Lens |
EKP202 |
|
Sample Preparation
EKT stock a wide range of sample preparation accessories including sample vials, syringes, sample filters and many others. For items not listed, please contact our sales office.
Syringe Filters
Filters can be used to remove particulates from CE samples. The PTFE membranes in various diameters (3-30mm) have a porosity of 0.2mm and 0.45mm.sold in packs of 100. E Sample preparation filters are also available with PTFE, polypropylene and polymide (Nylon 66) membranes with 0.2mm and 0.45mm porosity. Please contact our sales office for prices.
Autoampler Vials
Please refer to our Autosampler vials page for more vials and sampling containers
CE Instrument Calibration Kit
Developed by Chemical Solutions Inc. in the United States this easy to use it is the simplest and most convenient way to calibrate your instruments to the standards required by your GLP and ISO9000.
The kits contain all you need to quickly check and certify the calibration of your instrumentation for both wavelength and absorbance accuracy at regular intervals, without the need for specialist training.
Each kit consists of a wavelength calibration solution, a reference and eighth different absorbance calibration solutions. The solutions are prepared in a GMP laboratory to a high degree of precision and are fully NIST traceable. Each solution is clearly marked with eh batch number, the concentration and the expiry date. Concise and easy to follow instructions are also provided.
Using these kits, the calibration of CE (or HPLC) instruments does not require any knowledge of statistical methods, since all he relevant calculations are carried out by the PC spreadsheet programme included with every kit. The user is required only to enter the absorbance values measured for each of the calibration solutions and the programme does the rest.
After the procedure has been completed a calibration certificate summarising the results and stating full calibration conditions can be printed for signature by the operator. The solutions contained in these kits are particularly stable and have a shelf life in excess of one year.
Ideal for GMP/ISO9000
Fast and easy to use
Calibrates both wavelength and absorbance
Fully NIST traceable
Long shelf life
Description |
Cat No. |
Price (£) |
|
CE Instrument Calibration Kit |
EKP258 |
|
|
|
|
 |
